GarrettCom DX40 User Manual download pdf (Page 28)

CHAPTER 2 - Installation

Installation of the DX40 Unit

DX40 Serial Device Router Installation Guide

Figure 2-5. Ground and Power Connections

Making the Ground Connection

The ground wire should be 14 AWG terminated with a #6 ring lug.

Make the facility ground connection as follows:

1.Loosen the ground screw on the chassis, insert the #6 ring lug, and tighten the

ground screw.

2.Connect the other end of the ground wire to the facility ground.

ELECTRICAL WARNING: Verify that a proper ground connection is made from the

grounding screw to facility ground prior to connecting power to the DX40. Failure to have

a proper ground path could cause serious injury or death to personnel in cases of power

surges.

non-polarized

90-250V

~ or

0.2A;50-60Hz

Serial No:

0650 0034

DX40-01-H-D

Non-polarized power input.

Grounding screw

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

No comments

GarrettCom DX40 User Manual Page 28