GarrettCom 6K8 User Manual download pdf (Page 45)

Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)

press slowly and firmly with two fingers (as shown below in Fig. 3.6.2f) on the

top of the latching connectors until the connectors latched up securely.

Figure 3.6.2f:

Securely latching up

6KPMV Cards into a

Magnum 6K8-Series

Step 6. Now screw

down the daughter board with 6 #440 screws, so that it

holds the daughter board securely. The figure on the

left shows the top view of successfully installed

6KPMV cards inside and the Power Led (pin J5) and

Power supply cable (pin DSSV) connected to the

board pins as shown in Fig 3.6.2g with arrows.

Fig. 3.6.2g Top View:

6KPM Module installed and

insight for connecting two wires to the right pins

Step 7. Once the installation of granddaughter and

daughter modules is done, the front panel screen plates

of 6KPMV need to be placed on the face of the module

securely and carefully. Now screw down properly the

faceplate with 4 screws to complete the installation

process for port module. The front panel screen plate does not need any screws

to hold on port module, but need

to place tightly and carefully

while placing on LEDs.

Fig. 3.6.2h sliding in the top cover

onto the chassis base track

Step 8. Once 6KPMV card have been

installed (including faceplate

and screen plate), the chassis

cover should be replaced. Make

sure the chassis top cover is aligned properly to the base before securely sliding

the chassis base track inside the top cover properly as shown in Fig. 3.6.2h.

www GarrettCom com

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

No comments

GarrettCom 6K8 User Manual Page 45